PENTAGRAM Cerberus [P 6361]
WAN Settings
After you have selected the ISP connection type in
Setup Wizard
and you want to modify
the related settings, here you can modify and configure the settings in details.
Virtual Dial-up (PPPoE)
Connection Mode
: Show your current connection mode.
Account
: Enter them provided by your ISP.
Password
: Enter them provided by your ISP.
MTU
: Maximum Transmission Unit. It is the size of largest datagram that can be sent
over a network. The default value is
1492
. Do NOT modify it unless necessary. But if
when some specific website or web application software can not be open or enabled,
have a try to change the MTU value as 1450, 1400, etc.
Service Name
: It is defined as a set of characteristics that are applied to a PPPoE
connection. Enter it if provided. Do NOT modify it unless necessary.
AC Name
: Enter it if provided. Do NOT modify it unless necessary.
Connect Automatically
: Connect automatically to the Internet after rebooting the
system or connection failure.
Connect Manually
: Connect to the Internet by users manually.
Connect on Demand
: Re-establish your connection to the Internet after the specific
time (
Max Idle Time
). Zero means your Internet connection at all time. Otherwise,
enter the minutes to be elapsed before you want to disconnect the Internet access.
Connect on Fixed Time
: Connect to the Internet during the time you fix.
Notice:
The
Connect on Fixed Time
can be deployed only when you have set the
current time in
Time Settings
from
System Tools
.
25