PENTAGRAM Cerberus [P 6361]
Remote Web Management
This section is to allow the network administrator to manage the Router remotely. If you
want to access the Router from outside the local network, please select the
Enable
.
Enable
: Check to enable remote web management.
Port
: The management port open to outside access. The default value is 80.
WAN IP Address
: Specify the range of the WAN IP address for remote management.
NOTES:
•
If you want to login the device’s Web-based interface via port 8080, you need use the
format of WAN IP address: port (for example http://219.134.32.101: 8080) to implement
remote login.
•
If your WAN IP address starts and ends with 0.0.0.0, it means all hosts in WAN can
implement remote Web management. If you change the WAN IP address as
218.88.93.33-218.88.93.35, then only the IP addresses as 218.88.93.33, 218.88.93.34 and
218.88.93.35 can access the Router.
WAN Ping
The ping test is to check the status of your internet connection. When disabling the test,
the system will ignore the ping test from WAN.
Ignore Ping from WAN
: Check to ignore the ping request and give no reply.
42