Cerberus Wi-Fi Lite (P6381-0)
64
Problems with the Login Username and Password
I forgot my login username and/or password:
1.
The default username is “
root
”. The default password is “
1234
”. The Password and
Username fields are case-sensitive. Make sure that you enter the correct password and
username using the proper casing;
2.
Press the RESET button for 10-12 seconds, and then release it - the defaults have been
restored and the router restarts;
Problems with LAN Interface
I cannot access the router from the LAN or ping any computer on the LAN:
1.
Check the Ethernet LEDs on the front panel. A LAN LED should be on for a port that has
a PC connected. If it is off, check the cables between your router and the PC. Make sure
you have uninstalled any software firewall for troubleshooting;
2.
Make sure that the IP address and the subnet mask is consistent between the router and
the workstation.
Problems with the Internet Access
I cannot access the Internet:
1.
Make sure the router is turned on and connected to the network;
2.
If the WAN LED is off, refer to Section
WAN LED
of this troubleshooting;
3.
Verify your WAN settings;
4.
Make sure you entered the correct user name and password;
5.
For wireless stations, check that both the router and wireless station(s) are using the
same ESSID, channel and encryption keys (if encryption is activated).
Internet connection disconnects:
1.
If you use PPPoE, check the idle time-out setting;
2.
Contact your ISP.
If you have any troubles to configure or setup this Wireless-G Router, please feel free to
contact us.
Summary of Contents for Cerberus Wi-Fi Lite
Page 4: ......
