Cerberus Wi-Fi Lite (P6381-0)
17
Setup Wizard: Time Zone Settings
Configure NTP (Network Time Protocol) in the first
Setup Wizard
screen. NTP allows the
Wireless-G Router to automatically update system date and time from a time server.
Enable NTP client update
– Select this option to set the Wireless-G Router as an NTP client
to automatically update the system date and time from a time server on the network. Then set
the fields below. Clear this check box to disable this feature. In this case, logs will not show
the correct system time.
Time Zone Select
– Select the time zone of the geographical location in which the Wireless-G
Router is installed.
NTP Server
– Select a pre-defined time server.
Cancel
– Click
Cancel
to start configuring the Setup Wizard again.
<<Back
– Click
<<Back
to discard the changes and go back to the previous screen.
Next>>
– Click
Next>>
to continue to the next screen.
Summary of Contents for Cerberus Wi-Fi Lite
Page 4: ......
