Cerberus Wi-Fi Lite (P6381-0)
30
Encrypt
– This field displays whether security is activated on the wireless
network/device.
Note: If communication to a wireless network is encrypted, you must first
configure the same wireless security settings and then connect to that wireless
network.
Signal
– This field displays the signal strength to the wireless network/device.
Refresh
– Click
Refresh
to update this screen.
Connect
– Click
Connect
to establish a connection to the select wireless network.
Help
– Click
Help
to display on-line help information in a pop-up screen.
•
••
•
Wireless Basic Settings: Show Active Clients
When you set the Wireless-G Router to work in access point (AP) mode, you can view a
list of connected wireless clients in the
Active Wireless Client Table
screen.
MAC Address
– This field displays the MAC address of a connected wireless client.
Tx Packet
– This field displays the number of packets transmitted to this wireless device.
Rx Packet
– This field displays the number of packets received from this wireless device.
Tx Rate (Mbps)
– This field displays the transmission rate to this wireless device.
Power Saving
– The power saving feature allows a computer to stop transmitting
through the wireless adapter during sleep mode. This allows the computer (especially a
notebook) to save energy. This field displays whether this feature is activated on the
wireless client.
Expired Time (s)
– By default, the Wireless-G Router disconnects a wireless client after
300 seconds of inactivity (no beacon or data transmission). This field displays the time
that remains before the Wireless-G Router disconnects the wireless connection to the
wireless client. The Wireless-G Router resets this timer back to 300 when a beacon or
data packet is received.
Refresh
– Click
Refresh
to update this screen.
Close
– Click
Close
to close this screen.
Summary of Contents for Cerberus Wi-Fi Lite
Page 4: ......
