11
SAFETY INSTRUCTIONS
SAFETY MEASURES FOR THE CHARGER AND THE BATTERY
Refer to the Pellenc tools battery manual.
1–
Never modify the connector in any way whatsoever.
2–
THIS TOOL MAY CAUSE SEVERE INJURIES. Read carefully the instructions relative to the proper
handling, operation, maintenance, start-up and stop of the pruning shears. Familiarize with all the controls
and proper use.
3–
When the pruning shears are not in use, systematically turn the battery off «0»
4–
Before starting the motor, make sure that the blade is not in contact with any object.
5–
Always use a suitable lifting device complying with the working regulations in force for overhead works.
6–
Never use the tool if it is damaged, incorrectly set or incompletely assembled.
7–
Never remove or disable a safety device. Have the safety device repaired if it is faulty.
8–
Never disconnect the pruning shears power cord without first checking that the ON/OFF switch of the
battery has been set to OFF «0».
9–
Never carry the pruning shears suspended from the power cord.
10–
Do not disassemble the pruning shears.
11–
Do not open the direct box.
12–
Do not try to cut too large pieces of wood or other materials than wood.
Tool usage and maintenance
1–
Do not force the tool. Use the tool suited for the job.
2–
Do not use the tool if the switch does not allow it to be switched on and off.
3–
Disconnect the plug from the power source and/or battery pack prior to any adjustment, change of
accessories or before putting the tool away.
4–
When not in use, keep tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate it.
5–
Comply with the tool servicing instructions. Check that the moving parts are not out of alignment or
jammed, that there are no broken parts or that there is no other condition which could affect the operation
of the tool. If damaged, have the tool repaired before using it.
6–
Keep cutting tools sharp and clean.
7–
Use the tool, accessories and blades, etc. in accordance with these instructions, taking into account the
working conditions and the work to be done.
Maintenance and upkeep
1–
Have the tool serviced by an authorised PELLENC distributor, using only identical spare parts.
SAFETY WARNINGS FOR THE TREELION M45 BATTERY POWERED PRUNING SHEARS
