18
1
2
3
4
5
6
26_11_015B
1
2
3
4
5
26_11_016B
ADJUSTING BLADE BYPASS
ADJUSTMENT OF BLADE HALF-OPEN POSITION
Remark
: Do not leave the trigger inactive for more than 1.5
seconds after the 3 beeps, between points B and D or D and
E.
A. Press trigger
05
with your index finger, and with the other hand,
move switch
12
from position
«0»
to position
«1»
(the red face appears).
B. Wait until the battery beeps 3 times.
C. The pruning shears are switched on but inoperative.
D. Press and release trigger
05
; the pruning shears become operative.
E. Press and hold trigger
05
for 5 seconds.
F. The blade moves from one position to another from amongst 6 blade
overlap positions.
G. To memorize the chosen blade overlap, release the trigger when the
blade is in the desired position.
Remark
: Do not leave the trigger inactive for more than 1.5
seconds after the 3 beeps, between points B and D or D and
E.
A. Without pressing trigger
05
, move switch
12
from position
«0»
to
position
«1»
(the red face appears).
B. Wait until the battery beeps 3 times.
C. The pruning shears are switched on but inoperative.
D. Press and release trigger
05
; the pruning shears become operative.
E. Press and hold the trigger
05
for 5 seconds.
F. The blade moves from one position to another from amongst 5 half-
open positions.
G. To memorize the chosen blade half-open position, release the trigger
when the blade is in the desired position.
