pellenc Rasion Easy, User Manual, Page: 69 / 254

TROUBLESHOOTING AND TOOL PROTECTION
W
ARNING!
Always disconnect the lawn mower from the battery before working on the cutting blades.
Problem
Check
Probable cause
Possible action
The lawn mower does not start
the LEDs are of
f
Battery is of
f
Switch the battery button to 'I'
Battery discharged
Charge the battery
The battery does not work or The battery has a grey/black connector
Change the battery
W
rong connection with the
battery
Check the power cable Check the connections (tool and battery) Clean them with compressed air if needed Repeat the operation if required
The LEDs are lit
Defective control
-
Turn of
f the battery
.
-
Unplug and replug the power cable.
-
Restart the battery
Cutter housing blocked
-
Turn of
f the battery
.
-
Clean the inside of the housing
-
Restart the battery
Internal fault
Contact your approved distributor
.
The diodes are lit with a flashing error code
Mower safety shut down (immobilizer)
Move the mower to a slope or tilt of less than 20°
The lawn mower stops and starts
The LEDs light-up intermittently
The On/Of
f switches are
defective
Contact your approved distributor
.
The diodes are always on
Cutter housing clogged
-
Turn of
f the battery
.
-
Clean the inside of the housing
-
Restart the battery
Damaged power cords
Contact your approved distributor
.
31