pellenc Rasion Easy, User Manual, Page: 51 / 254

13
5
6
ADJUSTING THE CUTTING HEIGHT
PRELIMINARY SETTINGS ON THE TOOL
- Hold the cutting height adjustment handle (13) firmly
whilst simultaneously pressing on the two buttons to
release its position.
- Hold the buttons down and move the handle to one of
the six available positions, from 75 mm for the highest
cutting height to 25 mm for the lowest.
If you do not know which cutting height to use, start with the highest. Look at the results on
a small surface area and change the cutting height if necessary.
- Switch the battery on by pressing the button
- '0'- Battery off
- 'I'- Battery on
TURNING THE BATTERY ON
Congratulations! Your tool is now ready to operate.
You just need to turn on the battery and make a few preliminary settings (if they have not already been
done) and you can start mowing.
The cutting height is adjusted using the handle (13) to select one of six different cutting heights, from 75
mm at the highest, to 25 mm at the lowest.
CONTROL UNIT
You can start configuring the settings of the mower after
the battery is powered up.
The following can be set from the control box:
• The forward speed of the mower using the forward
speed selector knob (5).
• The rotational speed of the cutting blades using the
blade cutting speed selector knob (6).
13