pellenc EXCELION ALPHA, Operating Instructions Manual

Page: 35 / 48

GRASS STRIMMER EXCELION ALPHA
53_144013_C
LED status
Incident /
breakdown of the battery of the tool
handle
Probable cause Checks Solutions Repairer
Trigger no
longer functions
At an autho-
rised PEL-
LENC distributor
Change
the trigger
or sensor
Authorised
PELLENC
distributor
The power cord
of the backpack
battery is cut
Check the condi-
tion of the cord
Change
the cord
Pellenc au-
thorised
distributor
The tool has
reached its tem-
perature limit
See Section 7.3,
“Thermal safe-
ty shutdown”
See Sec-
tion 7.3,
“Thermal
safety shut-
down”
User
Authorised
PELLENC
distributor
The battery is flat
When stopped,
check the battery
charge level shown
in the side window
Recharge
the battery
(if less than
10% charged)
User
The tool stops
during use
I Off
Unintentional
pressing of the
tool's on/off but-
ton for more
than 4 seconds.
The battery LED
and digital dis-
plays are off.
Switch the
tool on again.
User
User The power
gradually in-
creases and
"C°" flashes
alternately
on the digi-
tal display.
I On
The tool has
reached thermal
safety shutoff
See Section 7.3,
“Thermal safe-
ty shutdown”
See Sec-
tion 7.3,
“Thermal
safety shut-
down”
Authorised
PELLENC
distributor
7.2. SUMMARY OF DISPLAY SCREEN MESSAGES
Note
Error messages appear on the digital display on the tool handle.
Diagnostics display codes Name
E1 Abnormal current
E2 Battery communication fault
E4 Tool temperature too high
E5 HMI board communication error
E9 Sensor fault
Important
Never attempt to dismantle the tool, under penalty of cancellation of the warranty. Contact your authorised
repair person.
35