CHARGING STATION PELLENC CHARGING STATION
56_136922-B
4.4. INSTALLATION OF CABLES
In order to adapt to the specific installation constraints of
the user, the PELLENC CHARGING STATION has two
side faces, both equipped with a slot allowing the cables
from inside the charging station cabinet to exit.
1. Choose one of the slots on the side faces of the
Charging station and pass the 10 cables coming
from the electrical box one by one.
2. Put the cable grommet (14) in place and partially
tighten the two fixing screws placed at its ends.
2. Fit the cables in the notches provided for this pur-
pose.
2. Tighten up the cable grommet.
2. Ddo up the 3 screws to keep it around the cables.
18
