EN 8
Initial use
Set the current time
When you connect the appliance to the mains electricity for the first
time, the display lights up.
After three seconds the clock symbol and
‘12:00’ will flash on the display.
6. Press the ‘less or more button’ to set the current time.
You can set the values in the display faster by holding down the
buttons for longer.
7. Confirm the settings by pressing ‘start/stop’.
If you do not press anything, the settings will be saved automatically
after three seconds.
You can always set the current time by pressing the ‘timer button’
twice. Then set the current time using the ‘less or more button’.
Confirm the settings by pressing the ‘timer button’.
The oven
Using the oven
• Remove all accessories from inside the oven and clean them with
warm soapy water. Do not use any abrasive cleaning agents.
• Set the oven at its highest setting for one hour with top and
bottom heat. This will remove any protective grease used during
manufacture.
• When you heat the oven for the first time you will notice a ‘new-
oven smell’. Don’t worry, this is normal. If necessary, switch on the
cooker hood.
• After letting it cool down, clean the oven with hot water.
• Only preheat the oven if it is required in the recipe or in the tables
of this manual.
Energy-conscious use of the oven
• Open the oven door as little as possible.
• Prepare dishes with the same cooking temperature simultaneously
(e.g., an apple pie and an oven dish) on the same grid, or above
each other using hot air. You can also let meat stew at the same
time.
Less and more
button
Start/Stop button
Timer button
YOUR COOKER
