Peimar EDITUS Series, User Manual

Page: 85 / 112

85
EN
5.5 Connection to communication and monitoring interface
The Editus and Magnus inverters are equipped with an RS-232 interface and
two RS-485 interfaces.
6
5
7
4
8
3
9
2 1 1. VCC
2. TxD (Transmit external data)
3. RXD (Receive external data)
4. NC
5. GND (Signal Ground)
6. NC
7. NC
8. NC
9. VCC
The RS-232 interface can be connected to the Ethernet module which can be
used for monitoring the operating status. For further details, refer to the relevant
guide (attached to the device or downloadable from the website www.peimar.com).
Alternatively, by connecting to the internet via the Wi-Fi module (optional) and
uploading the inverter data to the server, users can monitor operation information
remotely.
The use of the RS-485 port allows data monitoring via cable. It is possible to
manage the inverter by connecting an RS-485 cable with the following connector.