Peimar EDITUS Series, User Manual

Page: 89 / 112

89
EN
The display shows the country options to select.Pressing the “
▼
“ or ”
▲
“ to
select the correct country and press “ENT” button to confirm the selection.
Note: The configuration of the country of usage must be made at the first start,
before the inverter starts operating. An incorrect choice leads to malfunction of
the device. If users can not locate the corresponding country, please abort the
setting and contact Peimar assistance.
Note: we recommend, before connecting inverter to the grid, to select PV strings
input mode, entering "PV mode setting" on page 101 of this manual.
Graph
Init Grid Compliance 05-11-19 15:47
Setting Run-Info About
Power
0 W
E-Today
0.00 kWh
E-Total
0.00 kWh
T-Today
0.0 h
T-Total
0.0 h
Please set
grid country
Country
Australia
Austria
Belgium
Brazil
Denmark
Finland
France
Luxembourg
Netherlands
1
6.2.2 State
If the country has been set, the LCD shows the inverter operation status:
Initialization, Normal, Wait, Error and Update.
Initialization of the system
The inverter in normal (function) operation
The inverter in stand-by state
Normal
Init
A fault occurs during operation Error
Wait
The state of updating firmware Update
Then the inverter will display the interface for country selection as shown in figure.