Rev. 02-19 Page 27
USER MANUAL
ALARM PRESENCE ICON
LED OFF
= No alarm present
LED ON
= Maximum level alarm, persistent for longer than 1 hour
LED Flashing
= Alarm present (or maximum level reached)
TEMPERATURE MEASUREMENT UNITS ICON
LED ON
= The display shows the temperature of the ambient probe in °C
LED Flashing
= The display shows the TEMPERATURE SET in °C
WATER LOAD ICON
LED ON
= Water load in progress
WATER DISCHARGE ICON
LED ON
= Water discharge in progress
LED Flashing
= Water discharge test in progress
CURRENT MEASUREMENT UNITS ICON (A)
LED ON
= The display shows in ampere the instantaneous current absorbed by the humidifier.
STEAM PRODUCTION % MEASUREMENT UNITS ICON
LED ON
= The display shows the percentage production of steam, referred to the nominal one.
(Example: for an ES6 that produces 6kg/h of steam, 50% indicates the current production of
3kg/h)
RELATIVE HUMIDITY MEASUREMENT UNITS ICON
THIS ICON LIGHTS TOGETHER WITH (13) AND "
% RH
" APPEARS ON THE DISPLAY
LED ON
= The display shows the percentage of relative humidity of the connected probe
LED Flashing
= The display shows the percentage relative humidity SET (visible and
adjustable by pressing the SET key)
COMBINATION OF KEYS
+
1ST LEVEL PROGRAMMING
If pressed simultaneously for more than 3 seconds, they allow access to the first
level programming menu.
At the entry of the menu it is generated a confirmation BEEP.
EXIT FROM PROGRAMMING
If pressed simultaneously for more than 3 seconds in any programming menu, they
save the settings by exiting the menu.
At the exit of the menu it is generated a confirmation BEEP.
+
+
2ND LEVEL PROGRAMMING
If pressed simultaneously for more than 3 seconds, they allow access to the second
level programming menu.
At the entry of the menu it is generated a confirmation BEEP.
+
STATUS SWITCHING OF THE ESSENCE SUPPLY
(function active only if s9 = 7 or 9 and dO4 or dO5 = 4)
If pressed simultaneously for more than 3 seconds, the current status is displayed
(EoF=essence OFF or Eon=essence ON) and continuing to hold them pressed for
an additional three seconds, the status switches.
+
DRYING ACTIVATION
(function active only if s9 = 7 or 9 and dO4 or dO5 = -3 and stand-by active)
If pressed simultaneously for more than 3 seconds, the drying cycle is activated
and signalled on display by the writing Uon = outlet fans ON.
To stop this cycle, interrupt the stand-by.
3.2
