Page 26 Rev. 02-19
USER MANUAL
NANO EASYSTEAM CONTROLLER DESCRIPTION
The NANO EasySTEAM display is normally placed on the front of the humidifier. It consists of a
display with 3 digits and 9 luminous icons, for visual control of the magnitudes, and 4 keys for
choose the view and modify the settings (fig. 25).
Fig. 25
UP / DISPLAY KEY
- During programming: Increase values / Scroll up the parameters
- During the main display: Selects view between: "absorbed current (A)", "steam production %
(%)", "Ambient humidity display (%RH)" or "Ambient temperature display (°C)".
Each time it is pressed, it switches to the next display.
DOWN / MANUAL WATER DISCHARGE KEY
- During programming: Decrease values / Scroll down the parameters
- During the main display: Activates the manual water discharge
STAND BY / SILENCE
- Pressed for more than 2 seconds alternates the Stand-by status to the normal functioning
status, and vice-versa. At occurred switching, a confirmation BIP is generated.
- Silences the audible alarm, if in progress / Acquires an alarm
SET (active with S9 = 1, 3, 5, 6, 7, 9)
- When pressed, displays the setpoint and when released "Ambient humidity display (% HR)"
or "Ambient temperature display (°C)".
- It allows to set the %HR or °C set point, if pressed together with the Down key or the UP key
- Reset the audible alarm, if in progress.
DISPLAY
STAND-BY ICON
LED OFF
= Humidifier not powered
LED ON
= Humidifier ready for use
LED Flashing
= Humidifier in stand-by
STEAM OUTPUT ICON
LED ON
= Steam production in progress
CHAP. 3 PROGRAMMING
3.1
