Peavey PC1600X User Manual Download Page 36 | Manualshive

Page: 36 / 66

background image

36

Peavey PC1600X User Manual (rev-h)

display “Fdr”. This option allows the current position of the fader to set the note-on velocity. Pressing the up
button again will display “Rem”. This substitutes the incoming MIDI velocity when the button is activated
via a MIDI “note on” message. When pressed locally, “Rem” will act like the “Fdr” setting and velocity will
be determined by fader position.

MIDI STRINGS

A button can be assigned to transmit just about any MIDI message when pressed. These messages are
“Entered in hexadecimal form or captured via MIDI (see “Learn Mode” on page 24.

To define a button MIDI string:
1. From the button function page, select “String”. Next deselect and press the up direction button. The
following page will be displayed:

BTN16: String
F0 00 F7

2. Use the left and right direction buttons to select a byte to be edited. When the cursor is on a digit, the up/
down direction buttons, data wheel and/or associated fader will edit the digit. Pressing the up button when
between bytes insets a byte and pressing the down button between bytes deletes a byte.

STRING PRS/RLS

A button can be assigned to transmit any MIDI messages when Dressed and any other MIDI message when
released. These messages are “Entered in hexadecimal form.

To program the Press and Release String:
1, From the button function page, select “String Prs/Rls.” Next, deselect, then press the up direction button.
The following clave will be displayed:

BTN16: Press String
F0 00 F7

2. “Enter” the MIDI string.
3. After editing the “Press string's” press Exit. Press the up direction button to move to the release string
displayed as follows:

BTN16: Rls String
F0 00 F7

4. “Enter” the “Rls’ String.

STRING TOGGLE

A button can be assigned to toggle between any two MIDI message strings. These messages are “Entered in
hexadecimal form.

To program the two strings:
1. From the button function pace, select “String toggle”. Next, deselect then press the up direction button.
The following page will be displayed:

BTN16: String 1
F0 00 F7

«
...
34
35
36
37
38
...
»

Summary of Contents for PC1600X



































































Reviews:

No comments

Related manuals for PC1600X

Brand: Hagie Pages: 61

Brand: JackJaw Pages: 2

D-IMager EKL3104

Brand: Panasonic Pages: 13

Brand: Labokey Pages: 5

Brand: E-Z Trail Pages: 8

Brand: B&K Pages: 10

WJHD309A - DIGITAL DISK RECORDER

Brand: Panasonic Pages: 79

Brand: Abbott Pages: 2

FreeStyle Libre

Brand: Abbott Pages: 3

Brand: abc Pages: 8

Brand: Haki Pages: 24

Brand: Dakota Digital Pages: 5

Brand: K-9 Lights Pages: 12

Brand: Yetter Pages: 24

Brand: Yetter Pages: 32

Brand: ZacUrate Pages: 2

Brand: ZacUrate Pages: 2

Brand: Pani Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands