30
Peavey PC1600X User Manual (rev-h)
T
he
”Min”
parameter determines the value sent when the fader is in its lower-most position next to the
button.
The
”Max”
parameter determines the value sent when the fader is in its upper-most position. Simply
exchange the values in these two parameters to reverse the polarity of a fader.
The
“Mode”
parameter determines how matching incoming controller messages will be handled. The three
modes are as follows:
Merge:
Incoming controller messages that match a fader are always passed through the PC1600x. The MIDI data
generated from fader movement is merged with the data passing through the unit.
Replace:
Incoming controller messages that match a fader are passed through the PC1600x until the fader is moved.
The matching incoming controller messages are filtered until the Exit button is Pressed while on the Main
Page. This mode allows direct replacement of data in an existing stream of controller messages.
Update:
Incoming controller messages that match a fader are passed through the PC1600x until the fader is moved.
The data sent when the fader first moves will always match the last value that passed through the PC1600x,
regardless of the position of the fader. The matching incoming controller messages are filtered until the Exit
button is pressed while on the main page. This mode allows seamless modification of data in an existing
stream of controller messages.
To define a fader as a continuous controller:
1. First, set the function to “Controller” press the left/right, or Exit button to deselect the edit field, then press
the up button to move to the following page:
FDR01: Chnl Num
16 007
2. Cursor over to the “Chnl” field and set the MIDI channel for the controller message. Incrementing the
channel number above 16 will display “ChOut.” When “ChOut” is selected, the controller message will be
transmitted on the global MIDI transmit channel from the Utility menu.
3. Cursor over to the “Num' field to set the controller number to be transmitted. See Appendix C for a list of
MIDI Controller numbers.
4. With no parameters flashing, press the up direction button to access the following page:
FDR01: Min Max
000 127
5. Cursor left or right to the Min or Max field and edit the value as necessary (range=O-127).
6. With no parameter flashing, press the up direction button to access the mode page:
Summary of Contents for PC1600X
