Peavey PC1600X User Manual Download Page 23 | Manualshive

Page: 23 / 66

background image

23

Peavey PC1600X User Manual (rev-h)

BUTN: Type CH Start
REMT Off 01 000

When the type is set to “Notes” Note On messages will emulate a button press, while Note Off messages
(including Note On with velocity = 0, of course) will emulate a button release. In “PrgCh” mode, . Program
Chance messages will emulate a button press immediately followed by the release, (You probably won't find
much use for a Prs/Rls string when emulating in PrgCh mode - use normal or toggled strings instead.)

INDIVIDUAL PRESET INITIALIZATION

When creating new presets, it is perfectly fine to edit existing presets. However if you prefer to start with a
“Clean Slate” a preset initialization function is available in the utility menu:

1. Press the Utility button
2. Use the Up/Down buttons to move to the following screen:

UTIL: Init a Preset
00 Volume with mute

3. Select the Preset number you wish to re-initialize.
4. Press “ENTER”, then you will be asked. “ARE YOU SURE”
5. Press “ENTER” again to confirm initialization. The preset will be renamed “--initialized--”

Note:

All presets share the same block of memory, which gets divided among the available presets. This utility is
very handy for freeing up memory since you can reinitialize presets that are not needed.

MEMORY USAGE

PC1600x presets are dynamically allocated, allowing a single preset to be very large when necessary. If too
many larvae presets are created, the PC1600x will run out of preset memory. When this occurs, some
memory must be freed by removing (reinitializing) or re-defining presets. The memory usage display help
determine which presets to modify. To use the memory usage display:

1. Press the Utility button.
2. Use the Up/Down buttons or data wheel to access the following page:

UTIL: Memory
Free: 6324

4. Use the Up/Down buttons or the data wheel to view the amount of free memory and the amount of
memory used by each preset.

Note:

The names of faders, CV inputs and buttons only use memory per character. Therefore shortening the names
frees up memory. Preset names however have a fixed length so this wouldn't apply.

«
...
21
22
23
24
25
...
»

Summary of Contents for PC1600X



































































Reviews:

No comments

Related manuals for PC1600X

Brand: GE Pages: 242

Brand: GE Pages: 24

Brand: Balanced Body Pages: 3

Brand: Ecco Pages: 3

Brand: KaVo Pages: 13

Brand: vc999 Pages: 52

Brand: Daktronics Pages: 30

Brand: DAKOTA ULTRASONICS Pages: 28

Brand: Jasco Pages: 2

Brand: JB-Lighting Pages: 32

Brand: W&H Pages: 72

Brand: Vahle Pages: 36

Brand: Vahle Pages: 20

Brand: Vacon Pages: 102

Brand: Kärcher Pages: 148

Aristo WeldCloud Mig U5000i

Brand: ESAB Pages: 28

Brand: WAGNER Pages: 31

Scanmate-B DGH 8000

Brand: DGH TECHNOLOGY Pages: 53

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands