Peavey PC1600X, User Manual

Page: 31 / 66

31
Peavey PC1600X User Manual (rev-h)
FDR01: Mode
Merge
7. Cursor rig or left to access the “Mode” parameter, select either Merge, Replace or Update.
Master Fader/CV
Several faders can be aroused together and controlled by another fader. This is done by defining a single
fader or CV pedal as the master fader as shown:
1. Set the function to “Mater Fader” next press the up direction button when the function field is not
blinking, the following page will be displayed:
FDR01: Master of
Fader01= No
2. Cursor right once to activate the “Master of” field. Set this field using the Up/Down direction buttons, the
data wheel or the current fader. Moving any fader will select the fader moved.
3. The “Yes” or “No” on the right shows whether the fader in the “Master or' field is being controlled by the
current master fader. To toggle between “Yes” and “No.” simply press the right direction button. The
“Master of' field will remain active.
MIDI STRINGS
Any MIDI message can be assigned to a fader by “Entering the message as a hexadecimal string. A legible
“parameter format” allows the current fader position to be inserted into the message in one of many different
formats. A programmable minimum and maximum parameter value allows the parameter to span practically
any range. To define a MIDI message string: 1. Select the function “String”. Next, press the up direction
button when the function field is not blinking. The following page will be displayed:
FDR01: String
F0 00 F7
2. To edit the string, use the four direction buttons, the data wheel and the current fader. The left/right
direction buttons are used to select a specific byte, while the Up/Down direction buttons, the data wheel and
the current fader are used to edit a digit of the string. Pressing the “Up” button when
“Between Bytes
”
inserts a byte and pressing the “Down” button deletes the byte to the right of the cursor.
3. Replace with “pr” any byte that will be determined by the fader position. This is done by incrementing the
byte until “pr” is displaced. When the string is finished, press Exit.
4. Access the minimum and maximum parameters by pressing the up direction button when the underscore
cursor is not displayed.
FDR01: Min Max
0 127
5. Cursor over to either parameter and edit the value. Use the fader to set the parameter to the approximate value necessary. Use
the data wheel or the Up/Down buttons to “Enter” the exact value.
6. When neither field is flashing, press the up direction button to access the parameter format page: