Machine Operation
1.
Refer to the electrical schematic for the specific function assigned each light
color.
2.
Common configurations are as follows:
a.
The red light illuminates when the machine is jammed.
b.
The green light illuminates when the machine is running.
c.
The amber light illuminates when the machine is discharge high leveled,
or if the magazine is low leveled.
d.
The blue light illuminates when adhesive is low.
3.
An individual light may be programmed to remain solid for one function,
and flash for a second function.
4.
The warning horn may be programmed to sound for a set amount of time or
remain on until the operator addresses the warning.
How-To
Refer to the How To chapter of the CE35-T Case Erector manual.
Troubleshooting
If the light fails to illuminate or flash …
1.
Verify the bulb is functioning properly.
a.
If the bulb needs to be replaced, unscrew the cover from the beacon.
b.
Remove the bulb.
c.
Insert the replacement bulb.
2.
Replace the cover.
Operations Manual
CE35-T Case Erector Options
CE35T Options
B
e
a
c
o
n
I
n
d
ic
a
to
r
B
a
n
k
13
