Pearpoint Flexitrax P550c, Operation Manual

Page: 64 / 285

P550c Operation Manual
4 System assembly
www.pearpoint.com | 64
4 The thumbscrew mechanism should engage with corresponding recesses in in the baseplate. Once
located, tighten the thumbscrew to fix the elevator to the crawler.
5 The electrical connection can then be fitted to the front of the crawler as normal.
Once fitted, there is no need to remove the baseplate even when inspecting smaller pipes.
Setting the powered elevator height
Warning ! Never place hands, clothes or foreign objects into the mechanism of the powered
elevator.
Caution ! Do not lift the crawler using the powered elevator, unless using the
supplied lifting eye (shown at right)
The P356 powered elevator can be used to center the
system camera in the pipe being surveyed. The
elevator can be controlled using the dedicated
elevator control keys on the left hand side of the
keyboard.
Elevator control keys