CUTTING DEPTH
The recommended cutting depth is 1/4" below the
cutting table surface. The cutting clearance has been
fixed from original design.
• The blade shaft speed of
this saw is exclusively
designed for cutting
with diamond saw
blades. The saw may
only be used for cutting
natural and artificial
stone materials, do not
cut wood or metal!
• The saw uses diamond saw blades with diameters
up to 10". Saw blades with larger diameters must
not be installed on the saw.
• Choose the correct type of saw blade for the
material to be cut and the required cutting depth.
xiv.
CHOOSING THE RIGHT
BLADE
BLADE DIAMETER CUTTING DEPTH
8 inch 1-1/2 inch
10 inch 2-5/8 inch
Setting the blade too low
may damage the cutting table and if set too high,
the blade may grab the material being cut,
causing damage and possibly injury.
WARNING!
THE RIGHT BLADE DOES THE RIGHT JOB
For the most effective cutting and blade life always use the recommended Pearl Abrasive Co. blade.
APPLICATION
PEARL
BLADE
SERIES
Reactor ADM
HPXL Series
HP Series
Turbo Mesh
DTLB19 Series
Pro-V Series
Glass Blade
SH Series
CERAMIC EXTRA HARD PORCELAIN MARBLE GRANITE HARDSTONE GLASS TILE MOSAIC
TILE CERAMIC METAL TILES
– 12 –
