– 7 –
ASSEMBLY & SET-UP
1.
Remove the carton box cover by lifting the upper
cover.
2.
Locate the accessory box and open it. Obtain the two
lifting handles and install one on each end of the
saw. Install it in the side furthest from the post.
3.
Loosen the lock knob on top of the cutting head.
4.
Deploy the stand legs by following the “folded leg
assembly” section.
5.
Install the side extension table, side splash guard
and back splash guard.
6.
Install the spring holder on top of the sliding rail to
hold the power cable and the water hose.
7.
Fill the tray with water before operating the saw.
