56
7. Maintenance
7.1. Installing the battery
Your meter requires a 9V-battery for power. The battery-symbol
appears when the battery voltage drops to certain limits. For
correct operation, replace the battery as soon as possible.
Continued use with a low battery will lead to errors in readings.
WARNING!
To avoid electric shock, disconnect all leads from any equipment
before you remove or install the battery.
Follow these steps to install the battery.
1. Turn off the power and disconnect all test leads.
2. Remove the back cover by unscrewing the two screws of the
battery compartment and pull it off.
3. Remove the used battery.
4. Place the new battery inside the insulation capsule and snap it
onto
place.
WARNING!
Do not discard the provided battery insulation capsule. If you do
not use this insulation capsule properly, it might cause damage or
injury.
WARNING!
Do not operate the meter until you replace the batteries and close
the battery compartment cover.
