47
6.4. DC Current Measurement
1. Connect the black test lead to the COM jack and the red test
lead to the µA/mA- jack for a max. of 400mA. For a maximum
of 10A, move the red test lead to the 10A jack.
2. Set the Function switch to the µA/mA or 10A range to be used
and connect the test leads in series with the load under
measurement
3.
Select DC by pressing the “MODE” button.
Note:
1. If the current range is not known beforehand, set the
FUNCTION switch to the highest range and work down.
2. When only the figure "OL" is displayed overrange is being
indicated and the FUNCTION switch must be set at higher
range.
3.
Caution
: The maximum input current is 400mA, or 10A
depending upon the jack used. Excessive current will blow the
fuse which must be replaced.
6.5. AC Current measurement
1. Connect the black test lead to the COM jack and the red test
lead to the µA/mA jack for a max. of 400mA. For a maximum
of 10A, move the red test lead to the 10 A jack.
2. Set the function switch to the µA/mA or 10A range to be used
and connect the test leads in series with the load under
measurement.
3.
Select DC by pressing “MODE”-button.
