- 58 -
(left menu) The selected type and source are shown in the
Remove
menu on the right.
Remove
Remove the selected measure type
Remove
All
Remove all the measures
Snapshot
ON
OFF
Show all the measures of the snapshot source
Turn off the snapshot
Source
CH1
CH2
CH3
CH4
Select the snapshot source
9.1.1 Measure
Only if the waveform channel is in the ON state, the measurement can be performed. The automatic
measurement cannot be performed in the following situation:
1)
On the saved waveform
2)
On Waveform Math waveform
3)
On the video trigger mode
On the Scan format, period or frequency cannot be measured.
To measure the period or the frequency of CH 1, follow the steps below:
1. Click
to call up the menu panel. Click the
Measure
softkey on panel to show the automatic
measurement function menu
2. Select
Add
in the bottom menu
3. In the left Type menu, select
Period
4. In the right menu, select
Source
as
CH1
5. In the right menu, select
Add
. The period type is added
6. In the left Type menu, select
Frequency
7. In the right menu, select
Source
as
CH1
8. In the right menu, select
Add
. The frequency type is added
The measured value will be displayed at the bottom left of the screen automatically (see fig. 4.11)
