- 46 -
8.1.2 Color
Color temperature function uses color-grading to indicate frequency of occurrence. The hot colors
like red/yellow indicate frequently occurring events, and the colder colors like blue/green indicate
rarely occurring events.
(1) Click
to call up the menu panel. Click the
Display softkey on panel.
(2)
Select
Persist&Color
in the bottom menu.
(3)
Select
Color
in the right menu, choose
between
ON
/
OFF
.
Figure 4.3 Temperature color function is turned on
8.1.3 Counter
It is a 6-digit single-channel counter. The counter can only measure the frequency of the triggering
channel. The frequency range is from 2Hz to the full bandwidth. Only if the measured channel is in
Edge
mode of
Single
trigger type, the counter can be enabled. The counter is displayed at the
right bottom of the screen.
2 CH:
Figure 4.4 Frequenca counter display 2CH
4CH:
Figure 4.5 Frequency counter display 4CH
Operation steps:
1. Click
, click the
Trig Menu
softkey on panel, set the trigger type to
Single
, set the trigger
mode to
Edge
, select the signal source.
2. Click
, click the
Display
softkey on panel.
3. Select
Counter
as
ON
or
OFF
in the bottom menu.
