- 23 -
5.8.7 Setting the time base and voltage division
To set the time base and the voltage division using the touchscreen, press in the middle of the
touchscreen and arrows appear for setting the values. The time base or the voltage division is set
by simply pressing the arrows (see Figure 3.12).
Figure 3.12 Time base and voltage divider
5.8.8 Measurements using the cursor
You are able to determine a recorded current value with the cursor. To do this, press the menu
key (see Accessing the main menu) and switch on the cursor. Now, as in Figure 3.13, the option of
setting two cursor lines to the measured value appears.
Figure 3.13 Measurements using the cursor
