H² Detector
User Manual
Page 14
2013 © Peak Scientific – Rev 4 – 03/09/1
Connecting to the GC
1. First remove the plastic cover on the top of the GC.
2. Locate the cut-out hole on the aluminium plate directly above the rear
hole on the GC oven.
3. Make a hole through the insulation material, through to the oven. The
stainless steel tubing from the detector can now be pushed through the
hole, and secured in place using more insulation material.
4. Once the stainless steel tubing has been pushed through and secured,
the end of the tubing should be aimed at the inlet of the GC column.
