H² Detector
User Manual
Page 17
2013 © Peak Scientific – Rev 4 – 03/09/1
Sensor Cartridge Installation
The pre-calibrated smart sensor cartridges can easily be fitted or replaced as
they simply plug into the detector without the need for any tools. The sensor
cartridge is firmly held in place by two locking tabs. Some cartridges are
shipped with a protective cap to shield them from contaminants during
shipping. This cap must be removed before inserting the cartridge into the
Detector
unit, failure to do so may damage the transmitter. Switch the power
switch on the terminal module to the ‘on’ position and the re fit the
Sensor warranty is void if the sensor cartridge is opened by unauthorised user.
*The cartridge has an ‘activate by’ date that must be adhered to.
