Peak Scientific Hydrogen Detector, User Manual

Page: 14 / 24

H² Detector User Manual
Page 13 2013 © Peak Scientific – Rev 4 – 03/09/1
Rear Connections
Fittings Kit
Supplied in the Fittings Kit are all the fittings required to connect the Hydrogen
Detector to the Generator. The contents of the Fittings Kit are as follows:
1. Communications Cable × 1
2. In Line Filter × 4
3. Cartridge x 1
4. ¼” Push Fit Barbed Fitting × 2
5. ¼” OD x ⅛” THK Exhaust Tubing × 1.5m
6. ¼” OD x 3/16” THK Input Tubing × 1.5m
7. ⅛” OD Stainless Steel Tubing x 1m
8. Bulkhead Reducer Fitting x 1
9. Tygon Filter Tubing x 1m
10. Hex Key x 1
11. Hose Clips x 2
12. Wall Mounting Bracket x 1
13. Installation Guide– Hydrogen Detector × 1
14. User Manual CD– Hydrogen Detector × 1
In Line Filter
The In Line filter should be fitted, as close to the instrument as possible, on the
end of the tubing which is connected to the Input port at the rear of the
Detector, as shown below.
¼
” B
arb
ed
F
it
tin
g
H
os
e Cl
am
p
In
let
F
ilt
er
Inp
ut
T
ub
ing
Ty
go
n T
ub
ing