H² Detector
User Manual
Page 6
Safety Notices
Symbols
This manual uses the following symbols to highlight specific areas important to
the safe and proper use of the detector
Safety Notice to Users
These instructions must be read thoroughly and understood
before installation and operation of your Peak Hydrogen
Detector. Use of the Detector in a manner not specified by
Peak Scientific MAY impair the SAFETY provided by the
equipment.
When handling, operating or carrying out any maintenance,
personnel must employ safe engineering practices and
observe all relevant local health and safety requirements and
regulations. The attention of UK users is drawn to the Health
and Safety at Work Act 1974, and the Institute of Electrical
Engineers regulations.
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment
maybe impaired.
A
WARNING notice denotes a hazard. It calls attention to an operating procedure,
process or similar, which if not correctly performed or adhered to, could cause
personal injury or in the worst case death. Do not proceed beyond a
WARNING notice
until the indicated conditions are fully understood or met.
A
CAUTION notice denotes a hazard. It calls attention to an operating procedure,
process or similar, which if not correctly performed or adhered to, could cause damage
to the Detector or the Application. Do not proceed beyond a
CAUTION notice until the
indicated conditions are fully understood or met.
Caution, risk of electric shock. Ensure power to the Detector has been removed before
proceeding.
