PCE Instruments RH5, User Manual

Page: 8 / 16

page 8
Print saved data
To print your saved data, connect the device to the
printer using the printer cable that was
delivered with your device: Carefully loose
n
the
protection cap on the RH5. At first plug in the side
of the connector with the close plastic casing
at the
R
H5. Then switch on the device.
Not till then the other side of the cable has to be
plugged in at the printer. Switch on the printer
by pressing
. Now the green LED is blinking.
If it does not blink, please change the batteries
and try again.
Press the button at your
device
until you
reach the menu (see image on the right). Choose
„Print Logs“ and confirm by pressing .
Now you can select if you want to print the last
saved measuring series or all saved measuring
series (logs).
Confirm by pressing
again. The selected logs
are printed out now.
Info: To save paper, please think of clearing the data storage regularly.