© PCE Instruments
52
Eng
li
s
h
4.14.3.3
Viewing results of testing
Download «PCE-USC 30» program to PC.
In "File" item of the main menu choose the sub-item
"Open"
.
In the window that appears, choose the path to removable media
– the flaw detector memory or
the path where previously there was stored data on PC, move the cursor to the necessary file
with the testing results and click
"Open".
After opening the file in the time diagrams window and in the active area of the program there is
displayed the stored defectogram and there is the possibility to view the testing results,
measurements of the signal parameters, as well as to make the report protocol followed by its
printing out.
Note
- Viewing a list of data on the testing results from the flaw detector memory does
not store this data automatically in PC memory.
4.14.3.4
Printing out results of testing
To print out the testing results it is required:
- Select
"Report"
item in the main menu.
- Fill in the report form (Fig. 36).
- In the preview window of testing results click "Print"
.
4.14.3.5
Disconnecting the flaw detector with PC
- Turn off the flaw detector by pressing the On / Off button
.
- Disconnect the USB cable.
5
Labelling and Sealing
5.1
The flaw detector labelling complies with the manufacturer’s set of documents and
includes:
-
manufacturer’s name and trade mark;
-
name and designation of the flaw detector;
-
year and quarter of manufacture;
-
serial number;
-
designation of specifications (TU);
-
pattern approval mark.
Labelling is performed in English.
5.2
Labelling is made on the flaw detector casing by polygraphic technique.
5.3
Pattern approval mark is made on the flaw detector electronic unit by at least two seals
made on screws of casing cover.
