© PCE Instruments
50
Eng
li
s
h
ENC
(encoder)
– displays the reference number by encoder when synchronizing from ENC.
Cursor position
– displays the current vertical position of a measuring cursor in readings.
Fig. 38
To change the cursor position, it is required to place the "mouse" cursor onto the centre of a
measuring cursor (item 2, Fig. 38), and when there is a
cursor, move the measuring cursor
to the required position by holding the left mouse button down.
-
Cursor width
– displays a set width of a measuring cursor (in readings).
To change the width of a measuring cursor, place the "mouse" cursor to the extreme position of
the measuring cursor (item 1, Fig. 38), and, when there is a cursor, set the required width of a
measuring cursor by holding the left mouse button down.
"Signal angle"
– allows to change the signal phase:
- selects the step for signal phase change (from 0 to 90°);
- changing the signal phase with counter clockwise rotation considering the selected
step;
- changing the signal phase with clockwise rotation considering the selected step;
- restoring the initial signal phase.
Scale (HV)
- simultaneous horizontal and vertical scaling of a signal image:
-
scaling-up the signal image;
- scaling down the signal image
;
- restoring the initial horizontal to vertical ratio.
Scale (H)
– allows to adjust the horizontal scaling of a signal image:
- scaling-up the signal image horizontally;
- scaling down the signal image horizontally;
