© PCE Instruments
25
Source Mode
TC Source Output Format
This option appears only if TC Mode is
SOURCE
Available Options:
STEP
RAMP
At a time one can be selected.
Press F1 key on one of the options for more settings.
Reset Additional Info
Reset the Additional Information of Measure mode like
Minimum and Maximum This option appear only if TC
Mode is
MEASURE
.
4.3.1
STEP Page
Parameter Name
Description / Options
Low
Starting Value of Step
Enter value according to TC Display Mode. If display
mode is actual, enter value in temperature/mV and if
display mode is %, enter value in %.
High
Ending Value of Step
Enter value according to TC Display Mode. If display
mode is actual, enter value in temperature/mV and if
display mode is %, enter value in %.
Manual
(Output Type)
Step Manual Mode Selection CheckBox
Ticking this checkbox will enable Step Manual Mode and
Un-ticking will enable Auto Step Mode.
