72
computer. After the completion of the upload, the software will
automatically reminding the users ‘Whether to clean all the data in
device?’ Click
NO
the data device will not be deleted; Click
YES
the
test data in the device and downloaded template will be cleared, and
the
< User >
,
< Program >
and < Plan > templates created on the
computer will be downloaded into the device in turn to complete
data synchronization.
11.8.4
Command Send
This module is used to send control commands to the device, in
order to realize the remote control of PC software on the device.
There are two control commands: ‘Single Test’ and ‘Shutdown’.
Single Test: place the swab and close the top cover to ensure the
swab is being tested. Press the
Single Test
key to start test.
Shutdown: Shot down the device.
