39
检
测
与
结
4.2.3
Calling of Template Program
1.
Select
<
Template >
on the setting interface, and press
<
OK >
key to enter the reference template interface where
the commonly-used templates are provided.
2.
Users could select a certain reference template and press
<
OK >
to confirm the selection and access the reference template
for this industry. The template itself provides the test
< Sites >
,
<
Upper >
and
< Lower >
limits.
Press
<
Left >
key or
<
Right >
key to page up or
down;
Press
<
Up >
key or
<
Down >
key for line feed;
Press
<
OK >
key to confirm the selection;
Press
<
Setting >
key to return to the test interface and the
selected template will be automatically set as the test program.
Reminding
: After selecting and confirming a certain template
program, please press
<
Setting >
key to return to the test
interface, the selected template program will be set as the
current test program.
4.3
Start Test
1.
After completing the program setting, users could open the top
cover of the detector, insert the test ATP Quickswab, and
properly close the top cover.
2.
Keep the detector upright and ensure its incline angle is less
