PCB Piezotronics Larson Davis BAS002, Manual

Page: 42 / 75

BAS002 Configuring TCP/IP 7-8
Selecting AUX Signal Sources
To select AUX signal sources with the Model 831 in the
BAS002 software, follow these steps:
Step 1 Insert the plug end of CBL180 into the AC Out
jack of the Model 831. Figure 7-8 shows the AC Out.
FIGURE 7-8 Model 831 AC Out
Step 2 Insert the BNC connecter end of CBL180 into the
CBL181 extension cable connector.
Step 3
Insert the BNC connector end of CBL181 into the
AUX in connector on the BAS002 amplifier. Figure 7-9
shows the connection.
CBL180 and CBL181 are optional
accessories.
FIGURE 7-9 CBL181 Connection to Power
Amplifier
AC Out