PCB Piezotronics Larson Davis BAS002, Manual

Page: 15 / 75

2-3 BAS002
Step 3
Reassemble.
FIGURE 2-1 Remote Control Bottom
On the top of the remote control, press the power button to
turn the remote on or off.
Powering-up the Model BAS002
By default the value of the power
output is set to -40 dB, the amplifier
is set to
Stop mode, and the auxiliary
input is not connected to the final
power amplifier stage.
To power up the system, press the power switch on the rear
panel of the amplifier. This will turn on the display and
generate a tone sound sequence from the internal speaker of
the amplifier.