Paxar Monarch 9855, Operator'S Handbook Manual

Page: 68 / 128

S l a s h e d Z e r o
The slashed zero feature lets you select how you want the zero
character printed; either without a slash, 0 or, with a slash, ø.
Standard or reduced fonts print the slashed zero character (ø).
Bold and OCR fonts print the standard zero (0) only. The slashed
zero selection will
not be in effect until the format is sent to the
printer again. If you change the way zero is printed, you must
resend your formats.
To change the setting, from the Main Menu, select Setup, then
Defaults. Then, follow these steps.
1.
Press
l
or
r
until you see
DEFAULTS
l
Slashed Zero
r
2.
Press Enter/Pause . The current setting is displayed, for
example:
SLASHED ZERO
No
r
3.
Press
l
or
r
until you see the option you want. Then press
Enter/Pause . Press Escape/Clear until you see the Main
menu.
P o w e r - U p M o d e
Power-up mode lets you decide how your printer starts each time
you turn it on. If you want the printer to be ready to start printing
when it is turned on, use the Online power-up mode. If you want
the operator to perform some other task first, use the Offline
power-up mode.
To change the setting, from the Main Menu, select Setup, then
Defaults. Then, follow these steps.
6-6
Setting Defaults