Paxar Monarch 9855 Operator'S Handbook Manual Download Page 29

Page: 29 / 128

Close the exit cover.

10.

Load supplies by following the label loading procedures.

You

may notice a different color and texture on the platen roller.
Linerless supplies do not stick to the textured platen roller.

11.

Close the printhead assembly and the cover.

12.

Turn on the printer.

13.

Verify the alignment of the platen roller with the peel bar or
shelf. Press

Feed/Cut

to position the supply under the

printhead.

U s i n g S t r i n g Ta g S u p p l y

String tags are used in a variety of applications, such as jewelry
tags and item marking.

S t r i n g Ta g C o n s i d e r a t i o n s

Thermal direct printing, fan-fold supplies, and the knife are not
supported with string tags.

The maximum print speed with string tags is 6.0 inches per
second (ips).

A non-print zone of 0.250 inches (6.4 mm) exists on the string
side of the tag.

Use the wide setting for string tags.

Loading Supplies

2-13

Summary of Contents for Monarch 9855
































































































































Search results

Summary of Contents for Monarch 9855

Reviews:

Related manuals for Monarch 9855

Brands by name

Popular brands

Paxar Monarch 9855, Operator'S Handbook Manual

Search results

Summary of Contents for Monarch 9855

Reviews:

Related manuals for Monarch 9855

Brands by name

Popular brands