Paxar Monarch 9855 Operator'S Handbook Manual Download Page 47

Page: 47 / 128

S u p p l y P o s i t i o n

This function adjusts the machine to print at the vertical 0,0 point
on the supply.

The supply position adjustment should only

be made on inital printer setup. For format

adjustments, change the print position.

You may need to adjust the supply in or out to allow

tags and labels to be removed.

die cut labels to be removed easily.

The adjustments are in dots (0.0049 inch).

Increase the number to feed more supply out of the chute.

Decrease the number to feed less supply out of the chute.

This option takes effect on the next label or tag printed.
Changing supply position may also affect print position.

To change the setting, from the Main Menu, select Setup, Supply,
then Positioning. Then, follow these steps.

Press

until you see

POSITIONING

Supply Pos

Press

Enter/Pause

. The current setting is displayed, for

example:

Enter supply pos
[-300/300]: +0

Setting Supply Options

4-9

Summary of Contents for Monarch 9855
































































































































Search results

Summary of Contents for Monarch 9855

Reviews:

Related manuals for Monarch 9855

Brands by name

Popular brands

Paxar Monarch 9855, Operator'S Handbook Manual

Search results

Summary of Contents for Monarch 9855

Reviews:

Related manuals for Monarch 9855

Brands by name

Popular brands