Paxar Monarch 9855 Operator'S Handbook Manual Download Page 37

Page: 37 / 128

The high energy setting is lost when you turn

off the printer.

H i g h E n e r g y R i b b o n L i m i t a t i o n s

When using the high energy ribbon option:

Use a print speed of 2.5IPS (inches per second).

Printhead warranty is reduced to 100,000 inches.

Serial bar codes cannot be printed.

Do not use peel mode.

No more than 20% of the supply should have print (black
coverage).

CAUTION

The high energy ribbon may break or stick to the

supply when more than 20% of the supply

contains print.

Only white high energy supply should be used for bar code
printing.

Reverse fonts cannot be used.

A non-printing area of at least .1 inch (2.54 mm) must exist on
the left and right edge of the ribbon.

Do not print horizontal lines or bars.

Graphics are limited.

Loading Ribbon

3-5

Summary of Contents for Monarch 9855
































































































































Search results

Summary of Contents for Monarch 9855

Reviews:

Related manuals for Monarch 9855

Brands by name

Popular brands

Paxar Monarch 9855, Operator'S Handbook Manual

Search results

Summary of Contents for Monarch 9855

Reviews:

Related manuals for Monarch 9855

Brands by name

Popular brands