Patton SmartNode 4740 Series User Manual Download Page 61

Page: 61 / 106

Power

SmartNode 4740 Series (48–128 Ports) User Manual

• Specifications

Power

All units can be redundantly powered using 2 different, external power sources for system reliability reasons.

There are 2 power input options available:

•

110–230 VAC via internal power supplies (/RUI models) using IEC C12 connector. 2nd power input
optional—for power redundancy

•

20–59 VDC Dual Power input (/R48 models). Negative grounded power (positive grounded or floating DC
powered options available on request)

Power consumption (see

table 9

Dimensions & Packaging

19-in. rack-mount chassis

2U: 48 and 64 ports

4U: 72, 96, and 128 ports

Environment

•

Operating temperature: 32 to 104°F (0 to 40°C)

•

Operating humidity: up to 90%, non-condensing)

Table 9. Power Consumption

Power Consumption in Watts

48 Ports

64 Ports

72 Ports

96 Ports

128 Ports

All ports off-hook

118

146

177

228

All ports ringing, staggered, 3 REN

117

147

178

227

Summary of Contents for SmartNode 4740 Series











































































































Search results

Summary of Contents for SmartNode 4740 Series

Reviews:

Related manuals for SmartNode 4740 Series

Brands by name

Popular brands

Patton SmartNode 4740 Series, User Manual

Search results

Summary of Contents for SmartNode 4740 Series

Reviews:

Related manuals for SmartNode 4740 Series

Brands by name

Popular brands