Loading the Configuration (optional)
51
SmartNode 4740 Series (48–128 Ports) User Manual
4
• Initial Configuration
Note
Connecting both Ethernet ports to the same switch will only work if the
switch has separate ARP tables for each connection.
Loading the Configuration (optional)
The
provides a collection of Wizards that help to reduce the setup time of a Patton
device. Simply download the Wizard to your device, execute it locally, and you are ready to do phone calls after
the SmartNode has rebooted. Optionally, you may execute the Wizard that matches your application online
and import the generated .cfg config into the SmartNode. In addition to that the
provides
configuration file templates that may fit to your application.
Note
If your application is unique and not covered by any of Patton’s configura-
tion templates, you can manually configure the SmartNode instead of load-
ing a configuration file template. In that case, refer to the
Trinity Command
Line Reference Guide
for information on configuring the SmartNode device.
In this example we assume the TFTP server on the host with the IP address 172.16.1.11 and the configuration
named
SN.cfg
in the root directory of the TFTP server..
172.16.1.99(if-ip)[WAN]#copy tftp://172.16.1.11/sn.cfg startup-config
172.16.1.99(if-ip)[WAN]#
After the SmartNode device has been rebooted, the new startup configuration will be activated.
172.16.1.99(if-ip)[WAN]#
reload
Press 'yes' to restart, 'no' to cancel :
yes
The system is going down NOW
Additional Information
For detailed information about configuring and operating guidance, set up procedures, and troubleshooting,
refer to the Trinity Software Configuration Guide available online at
www.patton.com/manuals
.
