6
About this guide
This guide describes the SmartNode 4110 and 4520 Series hardware, installation and basic configuration. For
detailed software configuration information refer to the
SmartWare Software Configuration Guide
and the avail-
able Configuration Notes.
Audience
This guide is intended for the following users:
•
Operators
•
Installers
•
Maintenance technicians
Structure
This guide contains the following chapters and appendices:
•
Chapter 1
on page 10 provides information about router features and capabilities
•
Chapter 2
on page 20 contains an overview describing router operation and applications
•
Chapter 3
on page 27 provides quick start hardware installation procedures
•
Chapter 4
on page 38 describes getting started with the SmartNode router
•
Chapter 5
on page 47 contains definitions for the LED status indicators
•
Chapter 6
on page 51 contains information on contacting Patton technical support for assistance
•
Appendix B
on page 58 contains specifications for the routers
•
Appendix C
on page 64 provides cable recommendations
•
Appendix D
on page 71 describes the router’s ports and pin-outs
•
Appendix E
on page 74 lists the factory configuration settings for SmartNode 4110 Series devices
•
Appendix F
on page 76 lists the factory configuration settings for SmartNode 4520 Series devices
•
Appendix G
on page 78 lists the tasks for installing a SmartNode 4520 or 4110 Series router
For best results, read the contents of this guide
before
you install the router.
Summary of Contents for SmartNode 4520 Series
Page 47: ...47 Chapter 5 LEDs status and monitoring Chapter contents Status LEDs 48...
Page 74: ...74 Appendix E SmartNode 4110 Series factory configuration Chapter contents Introduction 75...
Page 76: ...76 Appendix F SmartNode 4520 Series factory configuration Chapter contents Introduction 77...
Page 78: ...78 Appendix G Installation checklist Chapter contents Introduction 79...
