![background image](http://html1.mh-extra.com/html/patton-electronics/model-2604/model-2604_getting-started-manual_4079204009.webp)
9
About this guide
This guide describes installing and configuring a Patton Electronics Model 2604 T1/E1 Digital Access and
Cross-Connect System (DACS). By the time you are finished with this guide, your DACS will be connected to
uplink and downlink T1/E1s and transferring data. The instructions in this guide are based on the following
assumptions:
•
The DACS will connect to a T1 or E1
•
There is a LAN connected to the Ethernet port of the DACS
Audience
This guide is intended for the following users:
•
Operators
•
Installers
•
Maintenance technicians
Structure
This guide contains the following chapters:
•
Chapter 1 describes the DACS
•
Chapter 2 describes installing the DACS hardware
•
Chapter 3 describes configuring the DACS for use
•
Chapter 4 details how to power up and deactivate the DACS
•
Chapter 5 contains troubleshooting and maintenance information
•
Chapter 6 contains information on contacting Patton technical support for assistance
For best results, read the contents of this guide
before
you install the DACS.