![background image](http://html1.mh-extra.com/html/patton-electronics/model-2604/model-2604_getting-started-manual_4079204029.webp)
Completing the hardware installation
29
Model 2604 T1/E1 DACS Getting Started Guide
2 • Hardware installation
– Connect the positive lead to the positive side of the DC supply.
– Connect the negative lead to the negative side of the DC supply.
The 40–72 VDC source must be reliably connected to earth.
5. Verify that the green POWER LED is lit. If the POWER LED is flashing
green
, refer to Chapter 5, “Trou-
bleshooting and maintenance”.
Hardware installation is complete. Refer to Chapter 3, “Configuring the DACS for operation”.